The SC-X Series Hot Water Pressure Washers are self-contained Mobile Wash Skids designed with the extreme duty user in mind and includes extra features to make it suitable for use in harsh and remote environments. The SC-X is designed for extra duty industrial use. It is self-contained and requires no outside power. It utilizes larger gasoline or diesel engines and pumps than our “SC” and “SS” series washers for tackling the biggest jobs with higher water volume. High pressure, hot water spray is generated on demand by the diesel fired burner so you can achieve the best cleaning results on grease and grime anywhere your job requires.
An extra-large, rugged, powder-coated steel frame surrounds the entire machine protecting its vital components. This Pro-Tect-It chassis has 4-way forklift access as well as built in lifting eyes so the machine can be top lifted with a harness or crane and the eyes double as tie down points for safe transportation. Each frame has double wall steel engine mounts to absorb engine vibration for smooth performance and includes mounting holes to hold optional stainless hose reels.
The stainless panels and coil wrap offer lifetime rust resistance and protection while keeping your machine looking new for years to come. (Optional stainless frame and enclosure panels available)
The 12v burner uses dependable PowerLight technology for maximum burner performance and efficiency, heating quickly, up to 250°F, to efficiently clean extra tough grime. No outside power source needed.
The coil is a Hydro Tek manufactured SpiraLast™ heating coil. Robotically fused ½” schedule 80 steel pipe is cold rolled to protect the steel pipe from fatigue and the spiral coil is then surrounded by ceramic insulation and stainless enclosure with double-wall end caps. Check out our Lifetime Coil Warranty.
Heavy duty, multi cylinder diesel engines are water cooled and include oil filtration and electric key start. A side mount muffler prevents water ingress and reduces engine vibration. Panel mounted engine condition indicator lights to monitor your engine temperature & oil pressure.
High torque, V-belt driven pump, low RPM, cooler and quieter operation for continuous duty performance. EZ Align™ belt tensioning system allows for easy, single bolt, belt tensioning adjustments.
Heavy duty, “roto-molded”, rust free fuel tanks with frame mounted, water separating fuel filter to protect against contaminated fuel. Large fuel tanks extend run time, eliminating interruptions to refuel.
Burst disc technology, pressure and flow switches, high limit thermostat, and pressure relief valve for operator safety Adjustable thermostat up to 250ºF, hour meter, and lighted on/off switches are panel mounted for easy operator access.
Heavy duty gun and wand with nozzle storage, heavy duty 50’ hose, quick release nozzle set, snap close battery box.
High flow models are two-gun compatible. Simply add the two-gun kit option to use with two operators to get your job done faster
Additional features for SCX30005-MS: 8 gallon float tank with low water shutdown, GeniSys flame-out safety control system for the burner, locking battery isolator switch, extended stainless front panel, emergency stop button, stainless drip/drain pan, total relief unloader. Pump, engine, drive & heater coil are operated 25% less than max. ratings for prolonged life.
Additional features for SCX30006-OS Hammerhead: Stainless steel frame, emergency air choke shutdown, stainless drip/drain pan
Model | PSI | GPM | Temp. | CC | Engine |
SCX30004D12 | 3000 | 4 | 250 F | 599 | Kubota Diesel |
SCX30005-MS* | 3000 | 5 | 250 F | 599 | Kubota Diesel |
SCX30006-OS* | 3000 | 5.5 | 250 F | 599 | Kubota Diesel |
SCX30008D12 | 3000 | 7.8 | 250 F | 719 | Kubota Diesel |
SCX35005D12 | 3500 | 4.7 | 250 F | 599 | Kubota Diesel |
SCX35006D12 | 3500 | 5.5 | 250 F | 599 | Kubota Diesel |
*Additional features included for the Mine Spec and Oil Spec models
Dimensions: 51.5″l x 32.5″w 47″h
Hydro Tek Parts Breakdown and Exploded Views 2015
Call us now to discover how this unique machine can add value to your current fleet.
Regular bin cleaning in high rise tower blocks is essential to maintain a good standard of hygiene. We clean, deodorize and disinfect the bins, bin stores and bin chutes. We also steam clean recycle bins, litter bins and street furniture for local authorities.
Many of our local authority clients have 1000’s of bins, situated across 100’s of sites. Often the bins are emptied on different days thus presenting some logistical challenges. With careful planning and good communication, we take care of all the logistics needed to effectively deliver a program of works.
Effortless bin cleaning at the touch of a button.
Chute Fire Servicing & Fire Inspections
Fire Closure Plate Servicing
Chute Fire Safe Certification
Bespoke Manufacturing
Chute Cleaning
Competence
Bin Cleaning
Bin Chute Cleaning
Bin Chute Maintenance
Durable Packaging Cleaning
Customer Login
Hydroforce Range
Waste Management Companies
Local Authorities
Roof & Gutter Survey & Maintenance
Unit 8, Cutler Heights Business Park,
Cutler Heights Lane,
Bradford,
West Yorkshire,
BD4 9AW
Contact Details
Tel: 0330 055 2644
info@hydrotechuk.co.uk
Jhumat House,
160 London Road,
Barking,
Greater London,
IG11 8BB,
United Kingdom
© 2025 Hydro Tech Maintenance Services.